Wednesday 27 September 2017

Crackle Week @ Tando

Hi folks and welcome to my blog post for Tando. This week, the theme is 'crackle'.
Everyone loves a bit of crackle don't they???



Here is my creation...







This week I used another one of the Tando long tags. (Yes, I am definitely addicted to these Tando tags!) And one of the hearts from the Tando grab bag of hearts

First, I added a layer of card stock with a wooden pattern over the front side of the tag with PVA glue and let dry. And painted the heart with DecoArt white gesso.

I added DecoArt crackle paint all over the surface of the heart and around the edge of the tag.





I used DecoArt texture sand paste and the Tando 4 x 4 distressed sequins mini stencil on the heart and the tag





Then used the paste around the edge of the tag.




I painted the tag and the heart using DecoArt Media Fluid Acrylic paint. Then I added gold metallic paint on the heart.



Thanks for popping by to view my blog post. Leave a comment if you wish, I love to hear your thoughts.
Toodles for now,
Lisa x


Everything I used to make this project is shown below and is  available on the Tando Website.

Set of 5 Long Tags    Grab Bag of Hearts    Mini Mask - Distressed Sequins   Fluid Acrylics: Burnt Umber   Fluid Acrylics: Cobalt Teal   Fluid Acrylics: Gold Metallic   Fluid Acrylics: Paynes Grey   Fluid Acrylics: Phthalo Green-Yellow   Media: White Crackle PAINT   Media: Texture Sand Paste   Media: White Gesso   

Sunday 17 September 2017

Glossy or Shiny @ Tando

Hi folks and welcome to today's post for Tando Creative. This weeks theme is 'glossy or shiny'. 

I used one of the Tando long tags and I wanted to create lots of different texture to compliment the shiny parts.

Here is what I created...




I first applied a piece of paper on the surface of the tag with PVA glue. 

I then created a mixture of DecoArt white gesso, glue and cornflour to create a really thick texture paste that is similar to the consistency of decorating filler. I applied a thick layer of mixture to the tag over the Tando distressed harlequin stencil






When the mixture was spread over the stencil I stippled the surface with a pallet knife to give it a rough texture on top. I also added some of the mixture around the edge of the tag and on the centre of the tag.






When it was dried I painted the tag with DecoArt Media Fluid Acrylics. I applied the paint thick in some areas and thinly in others so the paint would run around the shapes the texture paste mixture had created.  

I painted a piece of white card with DecoArt Media Fluid Acrylics and left to dry. I stamped the Carabelle Studio 'Libellule' (dragonfly) stamp with Onyx Black Versafine ink. And the sentiment from the Katzelkraft Dreamer stamp set






I fussy cut the dragonflies and the sentiment, covered them with clear embossing ink then clear ultra thick embossing enamel powder and melted the powder with a heat gun to create a glossy, shiny layer.  




I adhered the dragonflies and the sentiment to the tag. I tied some black organza ribbon around the top of the tag and heated it with the heat gun to melt the ribbon slightly.


Here is everything I used...


Set of 5 Long Tags   Distorted Harlequin Mask   Carabelle Studio "Dragonfly" Cling Stamp, White/Transparent, Mini    Image result for Katzelkraft Unmounted Rubber Stamp Set - Dreamer - KTZ169


All the Tando Creative and DecoArt items I used are available on the Tando website


Thanks for popping by. 
Please leave a comment if you wish, I love to read your thoughts.
Hope to see you soon,
Lisa xxx